Multitech Gateway Configuration - mLinux

Owned by Diarmuid
Last updated: Sept 28, 2021
1 min read

Connect USB cable to Gateway

>ls -ltrh /dev

>screen /dev/cu.usbmodem14201 115200

Note: keep trying if you see "busy" message

_     _

_ __ ___ | |   (_)_ __  _   ___  __

| '_ ` _ \| |   | | '_ \| | | \ \/ /

| | | | | | |___| | | | | |_| |>  <

|_| |_| |_|_____|_|_| |_|\__,_/_/\_\

MultiTech Systems mLinux GNU/Linux

mLinux 3.2.0 mtcdt /dev/ttyGS0


mtcdt login: root

Password:

root@mtcdt:~#


============================================================================

CONNECTING A CELLULAR MULTITECH CONDUIT TO A GSM NETWORK

https://www.thethingsnetwork.org/labs/story/connecting-a-cellular-multitech-conduit-to-the-network

============================================================================

gateway id

cat global_conf.json  /var/config/lora/global_conf.json



# Set "APN" to the APN for your cellular provider

$ mlinux-set-apn internet

# Dial the connection (using /etc/ppp/peers/gsm config)

$ pppd call gsm